Silane Coupling Agents | Adhesion Promoters | Amino Silanes | Surface Modifiers

Chemical Name:
N-beta-(aminoethyl)-gamma-aminopropyl-trimethoxysilane.
Synonym: N- [3-(Trimethoxysilyl)Propyl]Ethylenediamine;
N-(2-Aminoethyl)-3-Aminopropyltrimethoxysilane;
N-Аминоэтил-3-аминопропилтриметокси-силан
Chemical Structure:

Typical Physical Properties:
Chemical
Name |
N-beta-(Aminoethyl)-gamma-aminopropyl-trimethoxysilane |
CAS No. |
1760-24-3 |
EINECS No. |
212-164-2 |
Formula |
C8H22N2O3Si |
Molecular
Weight |
222.4 |
Viscosity
25°C |
4.5mm2/s |
Boiling Point |
259°C [760mmHg] |
Flash Point: |
128°C |
|
|
Color and
Appearance: |
Colorless transparent
liquid |
Refractive Index [25°C] |
1.446 [25°C] |
Density [25°C] |
1.025 |
Purity |
Min.98.0% by GC |
Solubility: YokoSil™ A21 is unlimited miscible with water with spontaneous hydrolysis occurring. Caution: Due to solution enthalpies mixing water is exothermic. Always stir YokoSil™ A21 into water. With alcohols miscibility is, in general, possible with self-catalyzed exchange of the alkoxy-groups. In aliphatic and aromatic hydrocarbons and (moisture-free!) ethers or esters YokoSil™ A21 is easily soluble at differing levels. With ketones and various halogenated compounds a slow reaction can occur. Towards acids, epoxides or isocyanates YokoSil™ A21 shows typical amine function. Some nonferrous metals can discolor upon contact. |
Introduction:
YokoSil™ A21 (equal to A-1120, GF 91, KBM603) is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level.
YokoSil™ A21 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as "coupling agent" leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture.
Application:
Excellent integral adhesion promoter for Epoxy, SPURsm, RTV Silicone and PVC-based sealant.
Useful component in primer systems for hybrid, SPUR, MS Polymer and polyurethane sealant.
Additive to phenolic binders for fibrous insulation.
Additive in phenolic and epoxy moulding compounds
Packing:
Net weight 210L steel drum or 1000L IBC container, for more details, please visit Packing Centre.
Storage:In the unopened container it has a shelf life of at least 12 months.